Different Methods Your Timber Floor Installers In Sydney Can Use

Worker installing timber floor panels

Timber floor installers in Sydney will be able to tell you that there are two main methods of putting in new wood flooring, they’re called direct stick and floating. Each of these methods offer a fantastic look but the option you choose should depend on your specific circumstances. The best person to ask about which method suits you is your timber floor installers in Sydney. Check out our quick overview of the different methods below to help you figure out what is most appropriate for your home or building.

Direct stick

Direct stick is a very common method that timber floor installers in Sydney use, it involved gluing floorboards down individually directly to the concrete foundation or timber substrate in older home designs. Boards may also be nailed down in addition to the gluing as this can prevent the floor from warping or cupping. Engineered floorboards won’t require nailing however as they do not move or expand and contract in the same way as solid wood floorboards. Your timber flooring installers in Sydney will be able to tell you more about this method.

Why choose this method?

If you are looking at getting timber floor installers in Sydney to install your wooden flooring to last for many years and you plan to see it be a long term fixture in your home, then the direct stick is the way to go. This method requires a high level of skill and expertise so it’s worth it to shop around and find good and knowledgeable timber floor installers in Sydney. It’s important that boards are laid correctly because they are stuck down. Any issues with the way they are laid means that it can be much more difficult and costly to correct any issues. One of the great advantages of this flooring type is that they can be quickly sanded or polished over the years and will last a lifetime with proper care and maintenance. Prepping and sanding the floors properly will make them look beautiful and new again.

Floating floorboards

Another extremely common method that timber flooring installers in Sydney use is floating floorboards which are not glued down or attached directly to the substrate. These floorboards instead are installed by fitting them together with a click in place method, which involved tongues and grooves being fit together so that the flooring lays together over insulation or a plastic underlay. The underlay under the floorboards is supposed to cushion noise and act as a barrier to moisture. Some floating floorboards are better than others, those with foam or more thickness tend to be more comfortable to walk on and are less prone to squeaking, this method requires no glue.

Why choose this method?

Worker uses a roller to coat timber floors.

Floating floorboards are very simple to put in and don’t require as much skill to install, making them very affordable. They’re a great option for those who are looking for a more temporary option. They’re ideal for commercial environments or for updating the look of the home and don’t require anywhere near as much time to prep and lay as direct stick boards. Any issues or mistakes with them can also be much more easily addressed as they are not affixed to anything and can be easily pulled up. One thing that some people find off putting is that they can sound hollower than direct stick flooring and they can also be more susceptible to moisture. They also cannot be sanded back and so will need replacing if the surface becomes damaged. You should think about what you’re needs are or speak to professionals to make your decision.